The exclusive vinyl kitDYEDBRO FLUOR decorates your bike while keeping it protected from friction and shocks. Made with the highest quality materials, the digital latex printing system uses eco-friendly inks, thus reducing the environmental impact, and contributes to preserving this quality and improving the life of the vinyl. All protection kits are made up of different individual parts to cover the upper and lower tube as well as other parts of the frame, compatible with all bicycles on the market. These pieces can be given different uses, placed in different places, trimmed with scissors or cutter so that the fit is as perfect as possible, making your bike have a unique personality.
If you find it cheaper, we will match the price.
SSL security certificate.
Shipping 24/72h Peninsula. Up to 10 days outside Spain.
You can return your order in 14 days
|Clean the frame well with soap and water in a spray can (pour about 6 drops of soap into a vaporizer of half a liter or so).|
|Dry everything well with paper.|
|Clean again slightly with alcohol.|
|Dry a dryer in the wet areas until it is completely dry.|
|Wet with the spray the area where the adhesive will be placed.|
|Moisten your fingers with the spray.|
|Remove each piece taking into account the position in which it is placed.|
|Place on the area in which it is located.|
|Once placed let dry at least 24 hours before using the bicycle.|
|If any area is not sufficiently adhered use the dryer to give it heat, reacti- var the adhesive and place it.|
|The bicycle must be perfectly clean of grease, dust and any polluting substances.|
|Apply in an area where the temperature is warm, if it is cold the material is placed worse.|
|If you get your fingers wet you will not leave traces.|
|It can also be glued dry if you have any notion of how to glue this type of material, this makes the material grip immediately and you can use the bike instantly.|
|The material can be deformed with heat if necessary, it can also be cut with scissors or blade.|