Stickers protection frame santa cruz v10 gloss
The Gloss Frame Protection Sticker Kit for Santa Cruz V10 models keeps your bike safe from bumps and friction. Made up of different parts suitable for every corner of your machine, they can be trimmed to ensure a perfect fit.
If you find it cheaper, we will match the price.
SSL security certificate.
Shipping 24/72h Peninsula. Up to 10 days outside Spain.
You can return your order in 14 days
|HOW TO USE|
|Clean the frame well with soap and water in a spray can: pour about 6 drops of soap into a vaporizer of about half a liter.|
|Dry with paper.|
|Clean again slightly with alcohol.|
|Dry wet areas with a dryer until completely dry.|
|Wet with the spray the area where the adhesive will be placed.|
|Moisten your fingers with the spray.|
|Remove each piece taking into account the position in which it will be placed.|
|Place on the area in which it is located.|
|Once placed, let dry at least 24 hours before using the bike.|
|If any area is not sufficiently adhered, use the dryer to give it heat, reactivate the adhesive and reposition it.|
|The bike must be perfectly clean of grease, dust and any polluting substances.|
|Apply in an area where the temperature is warm, because if it is cold the material is placed worse.|
|If you moisten your fingers you will not leave traces.|
|It can also be glued dry if you have any notion of how to glue this type of material, this makes the material grip immediately and you can use the bike instantly.|
|The material can be deformed with heat if necessary and can also be cut with scissors or blades.|
16 other products in the same category: