ROLLO FONDO LLANTA TUBELESS PEATY’S RIMJOB TALLER 50M

Bottom roll tubeless peaty's rimjob workshop 50m

Reference: 99RJT

Designed by professional cyclists, mechanics and scientists, Peaty's Rim Job 50m tubeless rim bottom has been developed from the ground up as a bicycle rim belt. The super high tensile strength tape is prepared with a custom-made adhesive that adheres like a limpet, but leaves the tire minimally clean when removed. An optimal amount of stretching and a large recyclable rigid core allows the tape to be applied with tension, coupling perfectly to the edge for a better fit. Our tape comes in 50-meter rolls in four different width options: 21 mm, 25 mm, 30 mm and 35 mm.

Measure
Quantity
null
Out of stock


  Minimum price guaranteed

If you find it cheaper, we will match the price.

 

SSL security certificate.

 

Shipping 24/72h Peninsula. Up to 10 days outside Spain.

 

You can return your order in 14 days

CHARACTERISTICS

A ROLL OF 50M COVERS APPROXIMATELY
27 x 26" wheels.
22 x 27.5" wheels.
22 x 29" wheels.
22 700c wheels.

HOW TO USE

  1. Remove the tire and any old rim tape.
  2. Clean and degrease the tire thoroughly.
  3. Make sure the tire is completely dry.
  4. Starting at least ten centimeters from the valve hole, press the tape firmly over the center of the tire and smooth towards the edges, eliminating any possible air pockets.
  5. Run the tape around the tire while keeping it taut, allowing at least ten centimeters to overlap at the end before cutting.
  6. Use a small skewer to drill the tape into the center of the valve hole.
  7. Remove any layer of dust and press the valve through the valve hole.
  8. Screw the valve block firmly by hand, making sure there are no air leaks.
  9. Put the tire back on, add tubeless sealant and inflate.
  10. Let's run!

99RJT21

Data sheet

Tubeless Accessory
Rim bottom

Specific References

ean13
5060541580732
New product

16 other products in the same category: