ROLLO FONDO LLANTA TUBELESS PEATY’S RIMJOB 9M

Bottom roll tubeless peaty's rimjob 9m

Reference: 99RJ

Designed by professional cyclists, mechanics and scientists, Peaty's Rim Job 9m tubeless rim bottom has been developed from the ground up as a bicycle rim belt. The super high tensile strength tape is prepared with a custom-made adhesive that adheres like a limpet, but leaves the tire minimally clean when removed. An optimal amount of stretching and a large recyclable rigid core allows the tape to be applied with tension, coupling perfectly to the edge for a better fit. Our tape comes in 9-meter rolls in four different width options: 21 mm, 25 mm, 30 mm and 35 mm.

Measure
Quantity
null
In stock

  Minimum price guaranteed

If you find it cheaper, we will match the price.

 

SSL security certificate.

 

Shipping 24/72h Peninsula. Up to 10 days outside Spain.

 

You can return your order in 14 days

CHARACTERISTICS

A ROLL OF 9M COVERS APPROXIMATELY
5 x 26" wheels.
4 x 27.5" wheels.
4 x 29" wheels.
4 wheels of 700c.

HOW TO USE

  1. Remove the tire and any old rim tape.
  2. Clean and degrease the tire thoroughly.
  3. Make sure the tire is completely dry.
  4. Starting at least ten centimeters from the valve hole, press the tape firmly over the center of the tire and smooth towards the edges, eliminating any possible air pockets.
  5. Run the tape around the tire while keeping it taut, allowing at least ten centimeters to overlap at the end before cutting.
  6. Use a small skewer to drill the tape into the center of the valve hole.
  7. Remove any layer of dust and press the valve through the valve hole.
  8. Screw the valve block firmly by hand, making sure there are no air leaks.
  9. Put the tire back on, add tubeless sealant and inflate.
  10. Let's run!

99RJ
2020-12-10

Data sheet

Tubeless Accessory
Rim bottom

Specific References

New product

16 other products in the same category: